|
Recycled ABS Capped With PMMA - AB201P |
|
|
Issue A, 03-05
|
AB201P - Recycled ABS Capped With PMMA
|
|
Standard Limitations
|
Unit
|
From
|
To
|
|
Sheet Thickness
|
mm
|
2.0
|
6.0
|
|
Sheet Width
|
mm
|
500
|
1500
|
|
Minimum Quantity = 2000 kgs
|
|
Notes:
1) Range of embossed surfaces available on thickness greater than 2.0 mm and widths less than 1350 mm
For requirements outside these limits please contact your local AEL sales office.
|
|
Product Data Information
|
| Applications |
Less critical applications where medium impact strength and a high gloss finish, combined with good scratch resistance are required. |
|
Property
|
Test Method
|
Units
|
Base
|
Capping
|
| Tensile Strength at Yield |
ISO 527
|
MPa
|
43
|
48
|
| Flexural Strength |
ISO 178
|
MPa
|
70
|
83
|
| Izod Impact Strength (notched) 23ºC |
ISO 180
|
J/m
|
100
|
32
|
| Heat Deflection Temperature (1.8 MPa) |
ISO 75
|
ºC
|
100
|
90
|
| Vicat Softening Point (5kg - 50ºC/h) |
ISO 306
|
ºC
|
100
|
95
|
| Density (1) |
ISO 1183
|
|
1.1
|
| Optical (2) |
High Gloss Finish on Smooth; Gloss on embossed sheet
|
| Optical |
Base colour - uncritical
|
|
The above information represents typical property values that are based on information supplied by polymer raw material suppliers.
(1) Density value for natural unpigmented sheet - this value can change, the magnitude of such depending on the pigment type and loading.
(2) Other gloss levels available on request.
Note: We reserve the right to make alterations without further notice. Information in this data sheet is intended as a guide only. No liability is accepted for loss or damage arising from use or reliance on this information, or if such infringes any patent.
|
| Ireland: |
Grace Rd, Athlone, Co Westmeath. Tel: +353 - 9064 - 92679. Fax: +353 - 9064 - 94086 |
| UK: |
Equipoint, Coventry Road, Birmingham B25 8AD. Tel: +44 - 121 - 764 4848. Fax +44 - 121 - 764 4443 |
| Netherlands: |
Schouwburgring 85, 5038 TK Tilburg, The Netherlands. Tel: +31 - 13 - 544 7265. Fax: +31 - 13 - 544 2747 |
|
