About UsNewsContact Us
Home
Make Text Bigger Make Text Smaller Reset Text Size
General Purpose Polystyrene - G10 Print
Issue A, 03-05
G10 - General Purpose Polystyrene
Standard Limitations
Unit
From
To
Sheet Thickness
mm
1.7
5.5
Sheet Width
mm
350
1250
Embosses: minimum quantity 2000kgs

1) Colour tints, MOQ 2 tonnes 

A range of embossed surfaces is available in thicknesses greater than 2.0 mm.
For requirements outside these limits please contact your local AEL sales office.


Product Data Information
Applications DIY applications, secondary glazing, internal smooth and embossed panels.
Property
Test Method
Units
Value
Tensile Strength at Yield
ISO 527
MPa
55
Flexural Strength
ISO 178
MPa
90
Izod Impact Strength (notched) 23ºC
ISO 180
J/m
-
Heat Deflection Temperature (1.8 MPa)
ISO 75
ºC
92
Vicat Softening Point (5kg - 50ºC/h)
ISO 306
ºC
100
Density (1)
ISO 1183
 
1.05
Flammability Rating @ 1.5 mm
UL94
class
HB
Optical
Translucent

The above information represents typical property values that are based on information supplied by polymer raw material suppliers.
(1) Density value for natural unpigmented sheet - this value can change, the magnitude of such depending on the pigment type and loading.

Note: We reserve the right to make alterations without further notice. Information in this data sheet is intended as a guide only. No liability is accepted for loss or damage arising from use or reliance on this information, or if such infringes any patent.


Ireland: Grace Rd, Athlone, Co Westmeath. Tel: +353 - 9064 - 92679. Fax: +353 - 9064 - 94086
UK: Equipoint, Coventry Road, Birmingham B25 8AD. Tel: +44 - 121 - 764 4848. Fax +44 - 121 - 764 4443
Netherlands: Schouwburgring 85, 5038 TK Tilburg, The Netherlands. Tel: +31 - 13 - 544 7265. Fax: +31 - 13 - 544 2747