About UsNewsContact Us
Home
Make Text Bigger Make Text Smaller Reset Text Size
ABS Capped With PMMA - DUROGLOSS AB301D Print
Issue A, 03-05
DUROGLOSS AB301D - ABS Capped With PMMA
Standard Limitations
Unit
From
To
Sheet Thickness
mm
0.8
1.2
Roll/Sheet Width
mm
1000
1450 
Minimum Quantity = 1000 kgs, Strong Colours = 2000 kgs 

  For requirements outside these limits please contact your local AEL sales office.


Pre-lamination Data Information
Applications   Furniture & Kitchen industry or where a high gloss finish, combined with a high scratch resistance is required.
Property                    
Test Method
Units
Capping
Tensile Strength at Yield 

 ISO 527

 MPa

 70

Izod Impact Strength (notched) 23ºC
ISO 180
J/m
11 
Heat Deflection Temperature (1.8 MPa)  
ISO 75
ºC
92
Vicat Softening Point (5kg - 50ºC/h)
ISO 306
ºC
101 
Density (1)                                         
ISO 1183
 
1.1
Flammability Rating @ 1.5 mm
UL94
class
HB
Corona Treatment   

 Dynes

 >40

Post-lamination Data Information
Gloss 

 Optical

 60º

 90

Scratch-Enrichsen 

 NFT 51113 NORM

 2N, Rev=10.5 mm/s

 80

Scratch Pencil 

 ASTM 3363

 

 2H

Colour accuracy (light colours)   

 DE

 <=1

Colour accuracy (strong colours)   

 DE

 <=2

 

Adhesion using PUREMELT QR 4663 
 Carrier Board
MDF
 Chip Board
Adhesion *
(DORUS® judging criteria)
1-2
high
bonding strength
100% fibre tear of carrier
1-2
high
bonding strength
100% fibre tear of carrier
Joint Opening (ºC) 
150
145
 Fira test English test method
Adhesion *
(DORUS® judging criteria)
Lagerung 3 Tage 40º C
              3 Tage 50º C
              3 Tage 60º C
              3 Tage 65º C
              3 Tage 70º C

 

                     1-2
high
bonding strength
100% fibre tear of carrier
                     1-2
high
bonding strength
100% fibre tear of carrier

Adhesion * 1 = Highest / best possible result, 5 = Lowest / worst possible result

Disclaimer : The above information is collated using a combination of internal testing, data supplied from raw material suppliers and external adhesion testing. It is the responsibility of the end user to ensure the product is fit for purpose.

Note: We reserve the right to make alterations without further notice. Information in this data sheet is intended as a guide only. No liability is accepted for loss or damage arising from use or reliance on this information, or if such infringes any patent.

 

 

Ireland: Grace Rd, Athlone, Co Westmeath. Tel: +353 - 9064 - 92679. Fax: +353 - 9064 - 94086
UK: Equipoint, Coventry Road, Birmingham B25 8AD. Tel: +44 - 121 - 764 4848. Fax +44 - 121 - 764 4443
Netherlands: Schouwburgring 85, 5038 TK Tilburg, The Netherlands. Tel: +31 - 13 - 544 7265. Fax: +31 - 13 - 544 2747